... {toc}
h2. Описание
Схема проверялась на Debian 10 и Ubuntu 20.04
# Accel
#* IP внешний 192.168.1.130
#* Интерфейс, за которым находятся абоненты enp0s8
# Billing
#* IP 192.168.1.156
h2. Настройка
h3. BRAS
{code:title=/etc/accel-ppp.conf}
[modules]
log_file
pppoe
ipoe
radius
pppd_compat
ippool
auth_mschap_v2
auth_mschap_v1
auth_chap_md5
auth_pap
shaper
[core]
log-error=/var/log/accel-ppp/core.log
thread-count=1
[common]
single-session=replace
sid-source=urandom
check-ip=1
[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
per-user-dir=/var/log/accel-ppp/users
per-session=1
copy=1
level=5
[radius]
verbose=5
nas-identifier=accel-ppp
nas-ip-address=192.168.1.130
gw-ip-address=192.168.0.100
server=192.168.1.156,AccelSharedSecret,auth-port=1812,acct-port=0,req-limit=100,fail-timeout=0,max-fail=10,weight=1
server=192.168.1.156,AccelSharedSecret,auth-port=0,acct-port=1813,req-limit=100,fail-timeout=0,max-fail=10,weight=1
dae-server=192.168.1.130:3799,AccelCoASecret
sid-in-auth=1
max-try=1
timeout=3
[cli]
verbose=0
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001
[ipoe]
verbose=1
ifcfg=1
shared=1
interface=enp0s8
mode=L2
start=up
calling-sid=mac
check-mac-change=1
soft-terminate=0
idle-timeout=45
password=AccelCommonPassword
attr-l4-redirect=L4-Redirect
l4-redirect-ipset=Block
unit-cache=10
[pppoe]
verbose=1
called-sid=mac
interface=enp0s8
[ppp]
verbose=1
min-mtu=1280
mtu=1400
mru=1400
ccp=1
mppe=prefer
ipv4=require
ipv6=deny
lcp-echo-interval=5
lcp-echo-failure=3
lcp-echo-timeout=45
unit-cache=1
unit-preallocate=1
[dns]
dns1=8.8.8.8
dns2=8.8.4.4
[ip-pool]
gw-ip-address=10.128.0.1
[pppd-compat]
verbose=1
ip-up=/etc/ppp/ip-up
ip-down=/etc/ppp/ip-down
radattr-prefix=/var/run/radattr
[shaper]
verbose=1
attr=Filter-Id
up-limiter=police
down-limiter=htb
[connlimit]
limit=10/min
burst=3
timeout=60
|
