configure terminal !!! Настройка параметров авторизации aaa authorization exec default local aaa authorization network default group CarbonRadius aaa authorization commands default none aaa authentication ppp default group CarbonRadius aaa authentication login default local aaa accounting update newinfo ! aaa attribute format NAS-FORMAT circuit-id ! aaa attribute format NAS-PORT-ID circuit-id plus remote-id ! aaa attribute format NAS_PORT_FORMAT circuit-id plus remote-id separator . ! aaa radius attribute nas-port format e SSAAPPPPQQQQQQQQQQVVVVVVVVVVUUUU type 32 aaa radius attribute nas-port format e SSAAPPPPQQQQQQQQQQVVVVVVVVVVUUUU aaa radius attribute nas-port-id format NAS-FORMAT aaa accounting service default group CarbonRadius aaa accounting subscriber default group CarbonRadius aaa authorization subscriber default group CarbonRadius aaa authentication subscriber default group CarbonRadius !!! Настройка радиус radius-server vsa attribute ignore unknown radius-server host {{billing_ip}} auth-port 1812 acct-port 1813 key 7 {{radius_secret}} timeout 5 retransmit 1 ! !!! Настройка coa aaa server radius dynamic-author port {{coa_port}} client {{billing_ip}} server-key 7 {{coa_psw}} ! ! !!! Настройка радиус группы aaa accounting network default start-stop group CarbonRadius no aaa group server radius CarbonRadius aaa group server radius CarbonRadius server {{billing_ip}} auth-port 1812 acct-port 1813 source-interface {{to_billing_int}} !!! Интерфейс для pppoe абонентов interface Loopback128 ipv4 address 10.128.0.5 255.255.255.255 !!! Шаблон для pppoe абонентов dynamic-template type ppp DT_PPPoE ppp authentication pap chap ppp ipcp dns 8.8.8.8 8.8.4.4 accounting aaa list default type session periodic-interval 5 ipv4 unnumbered Loopback128 ! !!! Полиси мап для pppoe абонентов policy-map type control subscriber PPPOE_PM event session-start match-first class type control subscriber PPP do-until-failure 10 activate dynamic-template DT_PPPoE ! ! event session-activate match-first class type control subscriber PPP do-until-failure 10 activate dynamic-template DT_PPPoE 20 authenticate aaa list default ! ! end-policy-map !!! bba pppoe bba-group DT_PPPoE service selection disable !!! Настройка отправки netlfow flow exporter-map Carbon version v5 options sampler-table timeout 2000 template data timeout 10000 ! transport udp 9996 source {{to_billing_int}} destination {{billing_ip}} ! flow monitor-map Carbon record ipv4 exporter Carbon cache entries 50000 cache timeout active 2 cache timeout inactive 5 ! !!! На абонентский интерфейс назначаем полисим мап, bba и netflow monitor @@@ for abon_int in abon_ints interface {{abon_int}} service-policy type control subscriber PPPOE_PM pppoe enable bba-group DT_PPPoE encapsulation ambiguous dot1q 2410 second-dot1q any flow ipv4 monitor Carbon sampler nfm ingress flow ipv4 monitor Carbon sampler nfm egress ! @@@ endfor end exit
pppoe_bng.cfg
Skip to end of metadata
Go to start of metadata